- Forums
- Cross Site
- Site and Forum Feedback
- Item Collector issues? Read this first.
Item Collector issues? Read this first.Follow
Anonymous
is item server down atm?
3 posts
The server must still be down, because I still get this message:
Processing queue of 78 items & 0 books.
Connecting to server... (216.155.41.198:23183)
Unable to establish connection...
Processing queue of 78 items & 0 books.
Connecting to server... (216.155.41.198:23183)
Unable to establish connection...
Server was down for a little bit, it's back up now.
Cognitur: profiles are only uploaded when you click the upload button in the profiles window.
Cognitur: profiles are only uploaded when you click the upload button in the profiles window.
12 posts
I just discovered another problem,
My character seems to be up to date but I cannot see his Inventory or his bank.
Next problem is that after I updated the character he appears 2 times with the same name (one marked Pussi, one Pussi*) so the uploaded character isn't updated but created new.
Sometimes Backend.exe crashes but restarting item collector works fine.
Will it be possible to just update the char?
How can I have a look at the characters Inventory and bank?
Thanks a lot
(btw. The item collector and magelo can be run at the same time without problems)
My character seems to be up to date but I cannot see his Inventory or his bank.
Next problem is that after I updated the character he appears 2 times with the same name (one marked Pussi, one Pussi*) so the uploaded character isn't updated but created new.
Sometimes Backend.exe crashes but restarting item collector works fine.
Will it be possible to just update the char?
How can I have a look at the characters Inventory and bank?
Thanks a lot
(btw. The item collector and magelo can be run at the same time without problems)
42 posts
I have a similar problem and noticed that my server name (Lanys T'vyl) is spelled differently between the collector version and the one I had on the web. (Lanys T'Vyl vs Lanys T'vyl <- note the lower case v)
The update occurs keyed off the char name / server name combo - with "different" server names in my case, I get two characters.
I suspect your situation is the same - what server are you playing on?
The update occurs keyed off the char name / server name combo - with "different" server names in my case, I get two characters.
I suspect your situation is the same - what server are you playing on?
Mathir, Wood Elf Druid
Ordo Ursi Prismatus
Lanys T'Vyl
Ordo Ursi Prismatus
Lanys T'Vyl
3 posts
Okay, the server connects now and when I hit the Upload button it says it uploaded. But when I check my character's items, they are not renewed.
Ralea,
I'm running Windows XP Pro Version 2002 SP1
AMD Athlon XP 3000+
2.09 GHz
1 GB of RAM
3Com Network Card
Driver Date: 8/13/2002
Driver version: 4.31.0.0
I have Bellsouth DSL & a Westell Modem
I have Norton Internet Security 2004 installed on computer.
Includes Norton AntiVirus and Norton Personal Firewall.
I have internet security options to Medium.
The program is starting but nothing is happening.
Nothing is listed in the Profile manager.
Please help.
What should my Profile Support name and path be called and located?
When the Item collector is running all i get is:
EQ Item Collection Engine v 2.01 (21.5) starting up...
Username set to: Kaeerin
Profiles enabled.
listening on 3Com EtherLink PCI (Microsoft's Packet Scheduler) .
Running in quiet mode.
Thank you.
I'm running Windows XP Pro Version 2002 SP1
AMD Athlon XP 3000+
2.09 GHz
1 GB of RAM
3Com Network Card
Driver Date: 8/13/2002
Driver version: 4.31.0.0
I have Bellsouth DSL & a Westell Modem
I have Norton Internet Security 2004 installed on computer.
Includes Norton AntiVirus and Norton Personal Firewall.
I have internet security options to Medium.
The program is starting but nothing is happening.
Nothing is listed in the Profile manager.
Please help.
What should my Profile Support name and path be called and located?
When the Item collector is running all i get is:
EQ Item Collection Engine v 2.01 (21.5) starting up...
Username set to: Kaeerin
Profiles enabled.
listening on 3Com EtherLink PCI (Microsoft's Packet Scheduler) .
Running in quiet mode.
Thank you.
"Knowledge is power."
Sir Francis Bacon (1561 - 1626), Religious Meditations, Of Heresies, 1597
Sir Francis Bacon (1561 - 1626), Religious Meditations, Of Heresies, 1597
Ralea,
I'm running Windows XP Pro Version 2002 SP1
AMD Athlon XP 3000+
2.09 GHz
1 GB of RAM
3Com Network Card
Driver Date: 8/13/2002
Driver version: 4.31.0.0
I have Bellsouth DSL & a Westell Modem
I have Norton Internet Security 2004 installed on computer.
Includes Norton AntiVirus and Norton Personal Firewall.
I have internet security options to Medium.
The program is starting but nothing is happening.
Nothing is listed in the Profile manager.
Please help.
What should my Profile Support name and path be called and located?
When the Item collector is running all i get is:
EQ Item Collection Engine v 2.01 (21.5) starting up...
Username set to: Kaeerin
Profiles enabled.
listening on 3Com EtherLink PCI (Microsoft's Packet Scheduler) .
Running in quiet mode.
Thank you.
I'm running Windows XP Pro Version 2002 SP1
AMD Athlon XP 3000+
2.09 GHz
1 GB of RAM
3Com Network Card
Driver Date: 8/13/2002
Driver version: 4.31.0.0
I have Bellsouth DSL & a Westell Modem
I have Norton Internet Security 2004 installed on computer.
Includes Norton AntiVirus and Norton Personal Firewall.
I have internet security options to Medium.
The program is starting but nothing is happening.
Nothing is listed in the Profile manager.
Please help.
What should my Profile Support name and path be called and located?
When the Item collector is running all i get is:
EQ Item Collection Engine v 2.01 (21.5) starting up...
Username set to: Kaeerin
Profiles enabled.
listening on 3Com EtherLink PCI (Microsoft's Packet Scheduler) .
Running in quiet mode.
Thank you.
"Knowledge is power."
Sir Francis Bacon (1561 - 1626), Religious Meditations, Of Heresies, 1597
Sir Francis Bacon (1561 - 1626), Religious Meditations, Of Heresies, 1597
Kaeerin:
I don't see any obvious reason it wouldnt be working for you. One thing you can try that should work tho, is going into options and changing the mode setting from WinPcap to Memory Reading. At that point, you should just need to have the profile support box checked, and your characters should show up in the profiles window when you log them in.
The path option for profiles is just where they get saved localy if you choose to export them to a file.
- rale
I don't see any obvious reason it wouldnt be working for you. One thing you can try that should work tho, is going into options and changing the mode setting from WinPcap to Memory Reading. At that point, you should just need to have the profile support box checked, and your characters should show up in the profiles window when you log them in.
The path option for profiles is just where they get saved localy if you choose to export them to a file.
- rale
Thank you it works now.
"Knowledge is power."
Sir Francis Bacon (1561 - 1626), Religious Meditations, Of Heresies, 1597
Sir Francis Bacon (1561 - 1626), Religious Meditations, Of Heresies, 1597
2 posts
I've got a question regarding a line i now see on Item collector. It seems that it now lists an item i've already seen before again sometimes. I'll give an example:
expiring item 26863
Item(26863) being updated.
Item(26863): Tome of the Wind's Wisdom [*Scroll of the Wind's Wisdom]
MAGIC LORE
Slots: PRIMARY SECONDARY
DEX: 10 INT: 8 WIS: 8 HP: 40 MANA: 40
MR: 7 FR: 7 CR: 7 PR: 7 DR: 7
WT: 3.0 Size: Small
Recommended level of 53
Category: Armor
Slot 1, Type: 7
Class: CLR DRU SHM NEC WIZ MAG ENC
Race: ALL
Item(32547) being updated.
Item(32547): Collapsed Toolkit [*Collapsed Toolkit]
MAGIC LORE
Slots: NONE
WT: 1.0 Size: Small
Effect: 3067 @ 0, Casting: 1.00, Use: Anywhere
Category: Misc
Cost: 0 pp 0 gp 0 sp 1 cp
Class: ALL
Race: ALL
The first item has a line "expiring item 26863" what exactly is meant by that? I've already updated this item into my local database so why is it being shown again even though i'm running quiet mode. Thanks!
expiring item 26863
Item(26863) being updated.
Item(26863): Tome of the Wind's Wisdom [*Scroll of the Wind's Wisdom]
MAGIC LORE
Slots: PRIMARY SECONDARY
DEX: 10 INT: 8 WIS: 8 HP: 40 MANA: 40
MR: 7 FR: 7 CR: 7 PR: 7 DR: 7
WT: 3.0 Size: Small
Recommended level of 53
Category: Armor
Slot 1, Type: 7
Class: CLR DRU SHM NEC WIZ MAG ENC
Race: ALL
Item(32547) being updated.
Item(32547): Collapsed Toolkit [*Collapsed Toolkit]
MAGIC LORE
Slots: NONE
WT: 1.0 Size: Small
Effect: 3067 @ 0, Casting: 1.00, Use: Anywhere
Category: Misc
Cost: 0 pp 0 gp 0 sp 1 cp
Class: ALL
Race: ALL
The first item has a line "expiring item 26863" what exactly is meant by that? I've already updated this item into my local database so why is it being shown again even though i'm running quiet mode. Thanks!
The itemcollector times out an item 30 days after it's been updated. It'll try to upload it again at that point, and the server will just refuse it and update the verified date on the item, so you can tell if an item hasnt been verified by lucy for an extended period of time. Basically its just a way to have an idea of if an item's entry might be out of date.
2 posts
There's a theory that the proc rate for weapon has been now found and goes as follows:
Proc Rate/min = ((100 + (unknown070))/50)
There is a table below from eqemu, another item collector database which shows the raw unknown070 values which lucy doesnt show yet via raw. This table and entire info comes from the sk forums here: http://www.shadowknight.org/forums/showthread.php?s=d3c930891f04269976201f8c4140d22f&threadid=19192&perpage=15&pagenumber=3 I'm hoping that perhaps this could be a little mini value under weapons that have procs perhaps to give even more info about the items in EQ!
Proc Rate/min = ((100 + (unknown070))/50)
There is a table below from eqemu, another item collector database which shows the raw unknown070 values which lucy doesnt show yet via raw. This table and entire info comes from the sk forums here: http://www.shadowknight.org/forums/showthread.php?s=d3c930891f04269976201f8c4140d22f&threadid=19192&perpage=15&pagenumber=3 I'm hoping that perhaps this could be a little mini value under weapons that have procs perhaps to give even more info about the items in EQ!
Quote:
+-------+---------------------------------+------------+--------+ | id | Name | unknown070 | nodrop | +-------+---------------------------------+------------+--------+ | 28849 | Cudgel of Cowardly Death | -50 | 0 | | 28908 | Dark Mace of Thought | -20 | 0 | | 28917 | Dagger of Thought | -20 | 0 | | 22998 | Ethereal Destroyer | -15 | 0 | | 8899 | Snowchipper | -10 | 255 | | 8903 | Spiked Velium Mallet | -10 | 255 | | 7906 | Pebble Crusher | 1 | 0 | | 8430 | Bloody Stone Dagger | 2 | 255 | | 52071 | Tarantella | 2 | 0 | | 8495 | Claw of the Savage Spirit | 3 | 0 | | 26566 | Ishinaear Xiall | 3 | 0 | | 26585 | Acrylia Handled Broadsword | 3 | 0 | | 7399 | Soulbane | 4 | 255 | | 8095 | Partisan of Stampede | 4 | 0 | | 8102 | Mithril Knuckles | 4 | 255 | | 19810 | Fireclaw Talons | 5 | 255 | | 26587 | The Sword of Ssraeshza | 5 | 0 | | 8916 | Silver Blade of Thunder | 10 | 255 | | 9264 | Fiercewind | 10 | 255 | | 24587 | Ivory Hilted Cleaver | 10 | 0 | | 22879 | Obsidian Scimitar of War | 25 | 0 | | 26599 | Caen's Bo Staff of Fury | 25 | 0 | | 22999 | Darkblade of the Warlord | 30 | 0 | | 24780 | Greatstaff of the Four Winds | 30 | 0 | | 24790 | Corpsegrinder | 30 | 255 | | 26738 | Fiery Staff of Zha | 50 | 0 | | 28855 | Bloodfrenzy | 55 | 0 | | 7822 | Blasphemous Blade of the Exiled | 65 | 0 | | 22946 | Kelp Hilted Mace | 70 | 0 | | 3820 | Barbed Fishing Net | 100 | 0 | | 21878 | Pile Driver | 100 | 255 | | 24793 | Greatstaff of Power | 180 | 0 | | 5800 | Hammer of Judgment | 250 | 0 | | 15996 | Hammer of Divinity | 325 | 0 | | 5798 | Hammer of Souls | 450 | 0 | | 22898 | Withering Staff of Agony | 530 | 0 | | 22907 | Furious Hammer of Zek | 530 | 0 | | 29365 | Hammer of Damnation | 530 | 0 | +-------+---------------------------------+------------+--------+
4 posts
:( Only checks for cookie for IE. Bah -- shouldn't it check for the cookie for default browser. I'm using Mozilla Firefox but I have to log into IE just to upload profile :(
The cookie should last a good long time... I'm not sure exactly when its set to expire, but I've been using the same one for months it seems. I use firefox all the time myself, but I'm not sure if/how to pull cookies from it, so I just logged in once with ie a while ago. :)
I think they are set for 1 year unless you dump them after each session.
Scholar
30 posts
Greetings!
I've been using the item collector for awhile now and have been loving it. All of a sudden though I can't upload my evolving equipment list onto my Characters.
I receive this error message when I attempt to upload :
Error: Permission denied, not logged in or not premium.
[b][/b]
I am a Premium member and I am logged in when I attempt to upload.
Any suggestions?
Best regards,
Phulavit
I've been using the item collector for awhile now and have been loving it. All of a sudden though I can't upload my evolving equipment list onto my Characters.
I receive this error message when I attempt to upload :
Error: Permission denied, not logged in or not premium.
[b][/b]
I am a Premium member and I am logged in when I attempt to upload.
Any suggestions?
Best regards,
Phulavit
2 posts
Item collector stopped working for me when GoD came out. I do not have GoD.
25 posts
Running Windows 98se cant get Profiles to show any help with this issue? This is the message I recieve when I try to check things out for my self
_________________________________________________________________
EQ Item Collection Engine v 2.01 (21.5) starting up...
Username set to: Presco
Profiles enabled.
listening on Network Everywhere Fast Ethernet Adapter(NC100 v2) NDIS5 Driver.
Running in quiet mode.
Setting up session: Client port 1113, Server port 1392.
Sequence start from server.
Processing player profile.
Warning: data len (5680) != size of profile struct (5672)
Processing player inventory.
Warning: Player inventory with null profile.
_________________________________________________________________
EQ Item Collection Engine v 2.01 (21.5) starting up...
Username set to: Presco
Profiles enabled.
listening on Network Everywhere Fast Ethernet Adapter(NC100 v2) NDIS5 Driver.
Running in quiet mode.
Setting up session: Client port 1113, Server port 1392.
Sequence start from server.
Processing player profile.
Warning: data len (5680) != size of profile struct (5672)
Processing player inventory.
Warning: Player inventory with null profile.
15 posts
I have exactly the same issue. WinXP/SP1 all expansions but GoD. Tried direct memory with no luck as well.
Please help! =)
Please help! =)
I just updated the collector for the patch today. - v 2.02 (21.5).
- rale
- rale
2 posts
Is the server down? Trying to connect with the item collector but only getting
Processing queue of 201 items & 0 books.
Connecting to server... (216.155.41.198:23183)
Unable to establish connection...
Dodga
Processing queue of 201 items & 0 books.
Connecting to server... (216.155.41.198:23183)
Unable to establish connection...
Dodga
4 posts
I can't even get the item collector to run. When I try I get: "Error2 An error occured while updating, please try again later." Using Winxp pro with all service packs installed. Linksys pci ethernet card. Direct cable connection, no router. Disabling firewall doesn't change anything.
Travaar
Is anyone still having trouble updating? The servers were having some trouble earlier, but I don't see anything wrong anymore.
I'm having a problem now. "Createfile failed on backend.exe: 32"
Tried uninstalling and re-installing and still same message. Any suggestions?
Tried uninstalling and re-installing and still same message. Any suggestions?
Recent Visitors: 0
All times are in CDT
- Forums
- Cross Site
- Site and Forum Feedback
- Item Collector issues? Read this first.
© 2018 ZAM Network LLC